探花精选

探花精选., Ltd

EN

探花精选., Ltd
EN
Home> Company News> How to Install Linear Motor Module？

How to Install Linear Motor Module？

2025,04,16
1. Pre-installation Cleaning Work?
Use a vacuum cleaner to thoroughly clean the installation surface of the CNC lathe and the linear clamping plate. Ensure the installation area is free of impurities like dust and debris to prevent impacts on installation accuracy and operational performance of the high-precision linear motor module.?
?
2. Flatness Inspection of Key Components?
Strictly check the flatness of the machine-tool's mechanical installation base plane.?
Verify the surface flatness of the stator magnetic separator, a critical component for linear motor module alignment.?
?
3. Stator Pre-installation of Magnetic Motor?
3.1 Installation Procedure?
Mount all stators of the electromagnetic motor onto the CNC lathe using stainless steel M8×25 screws as foundation bolts. Tighten them with a torque wrench set to 25N·m—a key parameter for secure linear motor module fixation.?
?
3.2 Precision Verification?
After installation, measure the surface precision and straightness of the installed magnets. Place a marble platform on the magnet surface and assess height differences to ensure compliance with magnetic density precision requirements. Note: Excessive stator placement may damage the magnetic plate, affecting linear motor module performance.?
?
4. Magnetic Plate Density Adjustment?
4.1 Polarization Direction Control?
During magnetic plate installation, confirm the correct polarization direction to avoid misalignment that disrupts motor magnetic field distribution and linear motor module operation stability.?
?
4.2 Magnetic Density Calibration?
Adjust the magnetic density between plates to optimize magnetic field strength, ensuring the motor operates at peak efficiency—a crucial step for linear motor module performance optimization.?
?
5. Servo Motor Installation Parameter Measurement?
5.1 Azimuth Angle Specification?
Precisely measure the azimuth angle for servo motor installation to guarantee proper orientation relative to the linear motor module structure.?
?
5.2 Shim Thickness Calculation?
Calculate the required thickness of the shim for the electromagnetic coil slide plate between the console and coil. Perform mold adjustments to achieve a 0.8mm magnetic density gap between the electromagnetic coil and magnet (note: the magnet's safety protection plate thickness is 0.3mm), critical for linear motor module magnetic field uniformity.
Previous
Next
Contact Us

Author:

Mr. Augus

E-mail:

augus@hojama-tech.com

Phone/WhatsApp:

What is the difference between a lead screw and a ball screw?

September 27, 2024

HOJAMA Highlighted Miniature Ball Screws at Xiamen
HOJAMA Highlighted Miniature Ball Screws at Xiamen

October 18, 2024

You may also like
Related Information
Why Are Ball Screws the Backbone of Medical Robots?

How does Tesla achieve innovative breakthroughs in the application technology of linear screw products?

一、Tesla has achieved multiple innovative breakthroughs in the application technology of lead screws in the fields of automobiles and humanoid robots. In the automotive field, the application of ball...

What are the differences in the application of screw products between domestic new energy vehicles and Tesla vehicles?

The differences in the application of screw products between domestic new energy vehicles and Tesla vehicles: 一、Application 1. Domestic new energy vehicles: 1) Battery production and assembly: The...

How do you know if a ball screw is bad?

Fault Diagnosis Methods and Technologies 1. Vibration Analysis Method 1) Vibration signal acquisition Collect the vibration signals of the linear motion ball screw pair through acceleration sensors...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Contact Us

Author:

Mr. Augus

E-mail:

augus@hojama-tech.com

Phone/WhatsApp:

What is the difference between a lead screw and a ball screw?

September 27, 2024

HOJAMA Highlighted Miniature Ball Screws at Xiamen
HOJAMA Highlighted Miniature Ball Screws at Xiamen

October 18, 2024

Please Leave Us A Message

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Upload Attachment
Send