
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Ball screws are precision components widely used in industrial machinery and equipment, playing a vital role in converting rotary motion into linear motion with high accuracy and efficiency. However, a common problem that affects its performance is the clearance or backlash between the ball nut and the screw shaft. This article will delve into the causes of this backlash.
?
Non-preloaded?ball screws will slide down when placed vertically with the nut rotating due to its own weight; and there will be considerable backlash, so they can only be used in machines with low operating resistance, with special consideration given to the requirement for positioning accuracy. Different applications determine the correct amount of preload and adjust the preload before shipment; therefore, when you order ball screws, please describe the operation of the equipment.
?
The standard hardness of steel balls, nuts, and screws are HRC 62~66, HRC 58~62, and HRC 56~62 respectively.
?
The slender ratio is too large, the smaller the length and diameter ratio of the screw the higher the rigidity, the limit of the slender ratio must be below 60 if the length and diameter ratio is too large the screwball?will produce the sagging of the self-weight.
?
Usually, industrial ball screws must be used with angled bearings, especially those designed with high-pressure angles; when the Precision Ball Screws?are subjected to axial loads, general deep groove ball bearings produce a certain amount of axial backlash, so deep groove ball bearings are not suitable for this purpose.
?
1)?If the bearing is mounted on the ball screw assemblies and they do not fit perfectly that the backlash will come for axial loads, which may be caused by too long or too short shoulder of the screw.
2)?Poor perpendicularity can lead to misalignment between the bearing seat surface and the axis of the locking nut's V-groove, or poor parallelism between the locking nut’s surface in two corresponding directions, resulting in skew. Therefore, to ensure perpendicularity, the locking nut’s V-groove at the shoulder and the bearing seat surface should be machined simultaneously, with grinding processes being the preferred method.
3)?Two locking nuts with spring washers are used to secure the bearing to prevent dislodgement during operation.
?
If the nut seat or bearing seat is not sufficiently rigid, it will deflect due to the weight of the element itself or the load of the machine.
?
1)?Element dislodged due to vibration or unsecured pin. Replace spring pins with solid pins for positioning purposes.
2)?The fixed screws of the ballscrew nut cannot be tightened because the fixed screws are too long or the screw holes of the nut are too shallow.
3)?The fixed screws of the nut come loose due to vibration or lack of spring washers.
?
Regardless of whether the surface of the bonding element is ground or scratched, as long as its parallelism or flatness is out of tolerance, the reproduction accuracy of the position during the movement of the bed table will be poor; therefore, in a machine, a thin spacer is usually used between the support base and the body of the machine to achieve the purpose of adjustment.
?
September 27, 2024
October 18, 2024
Ball screws are essential components in medical devices, providing the precision and reliability necessary for various applications in healthcare technology. They convert rotational motion into lin
一、Tesla has achieved multiple innovative breakthroughs in the application technology of lead screws in the fields of automobiles and humanoid robots. In the automotive field, the application of ball...
The differences in the application of screw products between domestic new energy vehicles and Tesla vehicles: 一、Application 1. Domestic new energy vehicles: 1) Battery production and assembly: The...
Fault Diagnosis Methods and Technologies 1. Vibration Analysis Method 1) Vibration signal acquisition Collect the vibration signals of the linear motion ball screw pair through acceleration sensors...
Email to this supplier
September 27, 2024
October 18, 2024
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.